|
|
|
||
Home • Signal v Time of Optrode
• Signal v Time
• Calibration Curve
• Instrument Schematic
|
|||
About Us
Trichloroethene Optrode Detection System Case Studies
|
SIGNAL TIME GRAPHS:
SIGNAL vs TIME OF TCE OPTRODE:
The TCE optrode operation begins with the activation
of the pulsed green light (source) and the purging of optrode by the reagent
pump. |
||
|
This figure illustrates
the sensitivity of the optrode. The differences in the slopes of the
reactions illustrates the sensitivity at various trichloroethene
concentrations. |
A calibration curve of measured slopes versus trichloroethene concentrations in water results in a linear plot from 5 ppb to 200 ppb. |
||
|
The battery operated, field portable instrument is capable of operating in the laboratory or in the field to measure trichloroethene concentrations in natural waters and soils. Analysis of 100 samples is possible with 30 mls of reagent.
The battery operated,
field portable instrument is capable of operating in the laboratory or in the
field to measure trichloroethene concentrations in natural waters and soils.
Analysis of 100 samples is possible with 30 mls of reagent. |
|||
Contact Us
6100 South Maple Avenue • Suite 114 • Tempe,
Arizona 85283
(480) 968-5141 voice • (480) 345-7555 fax |
|||